THE DOUBLE SHOT TUNE

$250-450.00

SCHEDULE HERE

All of our services are available for standard bicycles, E-bikes and cargo/family-hauler e-bikes. Additional services not covered in regular maintenance packages are listed below.

DOUBLE SHOT

STANDARD BIKE
$250
  • Safety Check and Seattle Scrubdown
  • Frame and Fork Inspection
  • Adjust brakes
  • Adjust derailleurs
  • Adjust headset bearings
  • Adjust hub bearings
  • Inspect Bottom Bracket
  • Torque bolts to specifications
  • Test Ride
BOOK DOUBLE SHOT

E-BIKE DOUBLE SHOT

STANDARD SIZE E-BIKE
$350
  • E-bike Safety Check and E-bike Seattle Scrubdown
  • Frame and Fork Inspection
  • Adjust brakes
  • Adjust derailleurs
  • Adjust headset bearings
  • Adjust hub bearings
  • Inspect Bottom Bracket
  • Torque bolts to specifications
  • Inspect all electrical wiring
  • Test Ride
BOOK E-BIKE

E-BIKE DOUBLE SHOT

CARGO/FAMILY HAULER
$450
  • E-bike Safety Check and E-bike Seattle Scrubdown
  • Frame and Fork Inspection
  • Adjust brakes
  • Adjust derailleurs
  • Adjust headset bearings
  • Adjust hub bearings
  • Inspect Bottom Bracket
  • Torque bolts to specifications
  • Inspect all electrical wiring
  • Test Ride
BOOK E-BIKE HAULER

For our full-on Double Shot, we do everything we do for the Safety Dance and Seattle Scrubdown, before going deeper into the bike. Wheels come off and spokes are re-tensioned. The rim are brought into radial and lateral trueness, and the hubs are adjusted. Brake pads are resurfaced or replaced, and brake cables are lubricated, or hydraulic pistons are cleaned and reset. We’ll ensure brakes work flawlessly, don’t rub and are quiet. Derailleurs are lubed and adjusted, and we will check alignment of the vulnerable derailleur hanger. We’ll get the shifting dialed. Headset and bottom bracket are adjusted, all fasteners torqued, afull inspection of all electrical wiring and finally we’ll do a test ride. 

Includes up to $25 of parts
  • Safety Check and Seattle Scrubdown
  • Frame and Fork Inspection 
  • Adjust brakes       
  • Adjust derailleurs
  • Adjust headset bearings
  • Adjust hub bearings
  • Inspect Bottom Bracket
  • Torque bolts to specifications
  • Test Ride  

For E-Bike service:

  • Inspect all electrical wiring

Pick-up and delivery service requires a minimum order of $200.

 

No diagnostic charge if work is performed.

 

All used parts are returned at the completion of service unless disposal of parts is requested.

ADDITIONAL SERVICES

Change tube/tire (standard bike) - $15

Bike fitting and follow-up with our professional on staff fitter - $275

Brake bleed (per wheel/fluid included) - $50

Complete build and fit - $600

Curbside Pick up - cost varies

E-bike flat fix rear (hub drive) - $40

Emergency Call - $300

Internal routing of cable, housing or hydraulic hose thru bars, stem and headset (Routing through stem) - $50

Internal routing of cable, housing or hydraulic hose thru frame (per cable/hose) - Internal Routing (each) - $25

Reassemble of professionally boxed bike - $200

Tubeless setup (per tire)-tape if needed and fluid included valves extra - $50